Filters

This unit is not equipped with a filter or rack. A field-pro- vided, high-velocity filter is required to ensure proper unit operation.

A filter must be in place any time the unit is operating.

Seasonal Inspections

A qualified service technician should inspect the complete system each season (heating and cooling). The following maintenance procedures should only be conducted by a qualified service technician. Do not attempt to service the unit in any way.

Venting System

WARNING

Asphyxiation Hazard

The exhaust vent for this furnace must be securely connected to the furnace flue collar at all times.

For your safety and to fulfill the terms of the limited warranty, a qualified service technician must annual3 ly inspect this furnace and its vent system.

Annually (before heating season) inspect furnace venting system, vent cap, heat exchanger and burners for corro- sion, deterioration, or deposits of debris. Remove any ob- structions.

Inspect the furnace venting system to make sure it is in place, physically sound and without holes, corrosion, or blockage. The vent connector must be correctly posi- tioned and sloped upward. The vent connector must be physically sound, without holes or excessive corrosion.

Inspect the furnace return air duct connection. The duct must be sealed to the furnace and it must terminate outside the space containing the furnace.

Inspect the physical support of the furnace to guarantee that it is sound. The support must not sag and must not have cracks or gaps around the base of the furnace. There must be a seal between the furnace base and the support. During a seasonal check, the service technician will in- spect the indoor blower and the burner flames along with the venting system.

Blower

Check blower wheel for any debris. Clean blower wheel, if necessary. The blower motor is pre-lubricated for extended bearing life. No further lubrication is needed.

Burner Flame

CAUTION

To ensure proper operation, a qualified technician should annually check the burner flame.

Service Reminder

Call your Lennox service technician if the unit will not oper- ate. Before calling, always check the following to be sure service is required.

1 - Check that electrical disconnect switches are ON.

2 - Check room thermostat for proper setting.

3 - Replace any blown fuses or reset circuit breakers. 4 - Gas valve should be ON.

5 - Check the air filter. A dirty filter limits air flow.

6 - Is gas turned on at meter?

7 - Is manual main shut-off valve open?

Record the model and serial number of the furnace. These numbers are on the unit nameplate, which is located below the burners.

Serial Number ________________________________

Model Number ________________________________

Safety Precautions

If you discover any of the following, shut down your unit and contact a Lennox dealer for an inspection by a qualified technician.

D If you repeatedly hear any new or unfamiliar sounds while your unit is operating, there may be a problem. For example, poorly performing burners can produce unfa- miliar noises.

DIf you smell any unusual odors, your unit may be operat- ing improperly. For example, units can give off unfamil- iar odors if components are required to operate in ab- normal conditions.

DLook for visible signs of a malfunctioning unit. Examples include unusual amounts of condensate on windows in- side your house, visibly burnt components or unusual dirt or rust accumulations on the vent pipe or in the unit.

DIf you experience headache, nausea, fatigue, or dizzi- ness, the cause could be exposure to carbon monoxide gas. This is often misdiagnosed as the flu because symptoms are similar. If you suffer from flu-like symp- toms that are exaggerated at home, but seem to sub- side while you are away from the house, exposure to carbon monoxide could be the cause.

Your vigilance may pay off in early detection of a problem before either personal injury or property damage occurs. Do not hesitate to contact a qualified service technician as an investment in your well being.

Page 5

Page 5
Image 5
Lennox International Inc G60UH(X) manual Filters, Seasonal Inspections, Service Reminder, Safety Precautions

G60UH(X) specifications

Lennox International Inc. is known for its commitment to quality and innovation in the HVAC industry. One of its standout products is the G60UH(X) series of gas furnaces, designed to deliver exceptional heating performance while maintaining energy efficiency. The G60UH(X) incorporates a variety of features and technologies that set it apart in the marketplace.

One of the main attributes of the G60UH(X) is its variable-speed blower motor, which optimizes airflow to match the heating demands of the home. This feature enhances comfort by providing consistent temperatures and reducing temperature fluctuations. The system can operate quietly, ensuring a peaceful environment, while also using less energy compared to traditional single-speed motors.

Efficiency is a key focus of the G60UH(X), boasting an Annual Fuel Utilization Efficiency (AFUE) rating of up to 96%. This high rating indicates that the furnace converts a significant portion of the fuel it consumes into usable heat, leading to lower energy bills and reduced environmental impact. Moreover, with its ENERGY STAR certification, the G60UH(X) meets stringent energy efficiency guidelines set by the U.S. Environmental Protection Agency.

Another highlight of the G60UH(X) is its advanced heating technologies. The unit is equipped with modulating gas valve technology that allows for precise control of the heating output. This ensures that the system can adjust its heating capacity based on the current conditions, contributing to improved comfort and efficiency. The integration of a multi-position design also provides flexibility in installation, allowing it to be adapted to various home configurations.

Durability is another characteristic of the G60UH(X). Constructed with high-quality materials, it is designed to withstand the rigors of seasonal changes, providing reliable performance for years. The unit is also designed for easy maintenance, which can save homeowners both time and money on service calls.

In addition to these features, the G60UH(X) can be easily integrated with smart home systems, enabling users to control their heating remotely and schedule operations according to their preferences. This connectivity not only enhances convenience but also allows homeowners to monitor energy usage.

In summary, the Lennox G60UH(X) series gas furnaces combines advanced technologies, high efficiency, and reliability. With features like variable-speed motors, a modulating gas valve, and an ENERGY STAR certification, it is an ideal choice for those seeking comfort and energy savings in their homes.