HOW TO SET THE ROOM THERMOSTAT
Your thermostat may vary from this example; however, the operation is similar.
TEMPERATURE SETTING LEVERS
Simply set the indicator lever or dial on the thermostat to the desired temperature for heating and cooling modes.
FAN SWITCH
In AUTO or INT setting, the blower runs only when the thermostat calls for either heating or cooling. The ON or CONT setting runs the blower for constant air circulation and filtering, regardless of whether the equipment is heating or cooling. If your thermostat does not have ON or CONT settings and the continuous fan option is desired, ask your dealer about an optional continuous fan switch. In high humidity areas, the continuous fan operation tends to increase indoor humidity levels, ask your dealer which setting is best for your area.
Temperature Setting Levers
SYSTEM SWITCH
Set the system switch for either heating, cooling or auto (if available). Autochangeover is a setting that allows the system to heat or cool, depending on the need, without manually switching from one to another. This setting is useful during seasonal changes when heating may be needed in the morning and cooling in the afternoon.
TEMPERATURE INDICATOR
The temperature indicator needle shows the actual room temperature.
System Switch
Temperature Indicator
| Hinged Door |
Fan Switch | (Shown Removed for Detail) |
PROGRAMMABLE THERMOSTATS
Many systems are installed with a programmable thermostat. These thermostats provide the same SYSTEM and FAN control as standard thermostats, but also provide the feature of setting certain temperatures for different times of the day or days of the week. Most provide for the selection of both heating and cooling set points (the temperature at which you want that mode to come on). Refer to the separate instructions provided with your programmable thermostat for operation and adjustments.
Page 5