Name and Function-Remote Control
Safety Precautions
Operating Instructions |
Tips Care and Maintenance
| Control |
1 |
|
2 |
|
12 |
|
11 |
|
4 | 9 |
10 |
|
7 | 8 |
3 | 6 |
| 5 |
1Signal Transmitter
•Transmits the signals to the Floor standing Type air conditioner
2OperationControl Display of the Remote
3Indoor Fan Speed Selection Button
•To select the desired fan speed in three steps [Low, Med, High]
4Cooling ON Button
5Temperature Setting Buttons
6Power ON/OFF Button
•Operation will start when this button is pressed, and stop when the button is pressed again.
7Timer Set Button
•Each time the button is pressed, the mode is changed in the following process.
Timer set (1, 2, 3, 4, 5, 6, 7 hours)
If you select “0:00” the off Timer function will be cancelled.
8Auto Airflow Direction Control Button
•The vertical louvers swing left and right.
•The horizontal louvers can be set by hand.
9Heating Button (Heat Pump Model Only) Auto Mode Operation Button (Cooling Model Only)
10 Soft Dry Operation Button
11 Indoor Fan Operation Button (Cooling Model Only)
12 Electric Heater ON/OFF Button (Option)
Troubleshooting
Wireless Remote Control Puts all functions at your fingertips
Handling the remote control
•Aim at the signal receptor on the Floor standing Type air conditioner when operating.
•The remote control signal can be received at a distance of up to about 7meters.
•Be sure that there are no obstructions between the remote control and the signal receptor.
•Do not drop or throw the remote control.
•Do not place the remote control in a location exposed to direct sunlight, or next to a heating unit, or other heat source.
4
