The following illustration shows the locations of parts on the system board.
1Battery
2SATA connector (hard drive cable) 3Optical drive connector
4PCI riser connector 5Front panel connector 612v power connector 7Power connector 8Front fan connector 9Microprocessor
10Internal speaker connector 11Memory connector 1 12Memory connector 2 13Microprocessor fan connector 14Clear CMOS/Recovery jumper 15Temperature sensor connector 16System fan connector 17Cover presence switch
Installing memory
Your computer has two connectors for installing double date rate 2 dual inline memory modules (DDR2 DIMMs) that provide up to a maximum of 4.0 GB of system memory.
When installing memory modules, the following rules apply:
vUse 1.8 V,
vUse 256 MB, 512 MB, 1.0 GB, or 2.0 GB memory modules in any combination up to a maximum of 4.0 GB.
Note: Only DDR2 SDRAM memory modules can be used.
Chapter 3. Installing options 21