2.Unplug all power cords from electrical outlets.
3.Locate the connector for the mouse. See “Locating controls and connectors on the front of your computer” on page 2 and “Locating connectors on the rear of your computer” on page 3.
4.Disconnect the failing mouse cable from the computer.
5.Connect the new mouse cable to one of the USB connectors.
6.Go to “Completing the parts replacement.”
Completing the parts replacement
After replacing the parts, you need to close the cover and reconnect cables, including telephone lines and power cords. Also, depending on the part that was replaced, you might need to confirm the updated information in the Setup Utility program. See ″Using the Setup Utility program″ in your User Guide.
To complete the part installation:
1.Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your computer. See “Locating components” on page 1 for the location of various components.
34Hardware Replacement Guide
