Lenovo A1000L FRU replacement notices

Lenovo IdeaTab A1000L

Thissectionpresentsnoticesrelatedtoremovingandreplacingparts.Readthis

sectioncarefullybeforereplacinganyFRU.

Loosescrewscancauseareliabilityproblem.IntheLenovocomputer,this

problemisaddressedwithspecialnylon‐coatedscrewsthathavethefollowing

characteristics:

•Theymaintaintightconnections.

•Theydonoteasilycomeloose,evenwithshockorvibration.

•Theyarehardertotighten.

•Eachoneshouldbeusedonlyonce.

Dothefollowingwhenyouservicethismachine:

•Keepthescrewkitinyourtoolbag.

•Alwaysusenewscrews.

•Useatorquescrewdriverifyouhaveone.

Tightenscrewsasfollows:

•Plastic to plastic

Turnanadditional90°afterthescrewheadtouchesthesurfaceoftheplastic

part:

•Logic card to plastic

Turnanadditional180°afterthescrewheadtouchesthesurfaceofthelogic

card:

•Torque driver

Ifyouhaveatorquescrewdriver,refertothe“Torque”columnforeachstep.

•Makesurethatyouusethecorrectscrews.Ifyouhaveatorquescrewdriver,

tightenallscrewsfirmlytothetorqueshowninthetable.Never use a screw

that you removed. Use a new one. Make sure that all screws are

tightened firmly.

•Ensuretorquescrewdriversarecalibratedcorrectlyfollowingcountry

specifications.

FRU replacement notices

more than 90°

(Cross-section)

more than 180°

(Cross-section)