Method 1: Automatic Installation
Turn on the computer. When the Lenovo logo appears, press the F2 key on the keyboard to start the Rescue System, then select Drivers and Application Installation.
Follow the screen prompts to install the Lenovo Drivers and Application Installation. Click Install to start installing the Lenovo Drivers and Application Installation.
The system will restart. After the system has restarted, the installation process will continue until completion.
Method 2: Manual Installation
In the Windows system, Click Start → All Programs → Lenovo → Lenovo Drivers and Application Installation.
After starting the procedure, install all the drivers and software manually according to the prompts.
Notes:
1.It is recommended not to install the software which is already on the computer.
2.Before accessing the operating system, make sure that the Drivers and Application installation has been installed automatically. After that, the manual installation function can be used.
3.3System Setup
System Setup configures the network configuration for the Lenovo Rescue System to ensure your Rescue System can connect to internet. In addition, System Setup sets and manages all passwords for the Lenovo Rescue system.
3.3.1 Launch
Turn on the computer. When the Lenovo logo appears, press the F2 key to launch Rescue System. Then select System Setup.
3.3.2 Network Settings
Depending on the network access mode of the computer, select “ADSL” or “LAN Connection” in the network connection modes.
1.If you select “ADSL,” input the username and password of the ADSL connection.
