Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes.

The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls.

Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free.

Note: If your system has previously been used with a CRT monitor and is currently configured to a display mode outside the range of this monitor, you may need to reattach the CRT monitor temporarily until you have re-configured the system; preferably to 1440 x 900 at 60 Hz, which is the Native Resolution Display mode.

The display modes shown below have been optimized at the factory.

Table 2-3.Factory set display modes

Timing

Refresh rate(Hz)

 

 

PAL

50Hz

 

 

640x350

70Hz

 

 

640x480

60,72,75Hz

 

 

720x400

70 Hz

 

 

800x600

60,72,75Hz

 

 

832x624

75Hz

 

 

1024x768

60,70,75Hz

 

 

1152x864

75Hz

 

 

1280x768

60Hz

 

 

1280x1024

60,70,75Hz

 

 

1366x768

60Hz

 

 

1440x900

60,75Hz

 

 

Chapter 2. 2-7

Page 18
Image 18
Lenovo LT1953 manual Selecting a supported display mode, Pal