Chapter 2. Overview of the ThinkServer Remote Management Module
This section briefly describes the features of the Remote Management Module.
The Remote Management Module runs on the server system as an integrated solution and integrates the embedded operating system. Independent of the server operating system, the embedded operating system can provide a whole set of complete, stable and effective solution for the server. As a system administrator, you can respond anytime and anywhere to emergency failure and take remote control on the server through the network.
Features of ThinkServer Remote Management Module
ThinkServer Remote Management Module is easily accessible by remote KVM and controllable via LAN or Internet. It will digitize and compress the collected video signal, keyboard, mouse signals and then send to the remote console. Embedded with remote access and related control software, the module also allows integrated remote power management via IPMI. Key features of the Remote Management Module are as follows:
•Embedded Web UI - remote power on / off, system health, system information, alert notification and event log
•USB 2.0 media redirection - boot from remote media
•Security - open source SSL
•Compatible with IPMI V2.0
•KVM - allow remote viewing and configuring in the POST and BIOS setup utility
© Copyright Lenovo 2010 | 3 |
