Lenovo S206, S200 manual Removal steps of LCD unit

Lenovo IdeaPad S200/S206 Hardware Maintenance Manual

1090 LCD unit

For access, remove these FRUs in order:

•“1010 Battery pack” on page 34

•“1030 Hard disk drive” on page 37

•“1040 DIMM” on page 39

•“1050 PCI Express Mini Card for wireless LAN/WAN” on page 40

•“1060 3G Card” on page 42

•“1070 Keyboard” on page 43

•“1080 System board” on page 45

Figure 9. Removal steps of LCD unit

Remove four screws a.

a a

a a

Step	Screw (quantity)	Color	Torque
a	M2 × 3.5 mm, flat-head, nylok-coated (4)	Silver	1.5 kgfcm

When installing:

•Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

•Make sure that the LCD connector is attached firmly and make sure that you do not pinch the antenna cables when you attach the LCD assembly. Route the LCD cable along the cable guides.

48