Lenovo Z565, Z560 Antenna assembly and LCD cover, Removal steps of antenna assembly and LCD cover

Ideapad Z560/Z565 Hardware Maintenance Manual

1190 Antenna assembly and LCD cover

For access, remove these FRUs in order:

•• “1010 Battery pack” on page 34

•• “1020 Dummy cards” on page 35

•• “1030 Hard disk drive (HDD)/Memory/CPU (Central processing unit)/Mini PCI ExpressCard slot compartment cover ” on page 36

•• “1040 Hard disk drive ” on page 37

•• “1050 Optical drive” on page 39

•• “1060 DIMM” on page 40

•• “1070 Fan assembly and Heat Sink assembly” on page 41

•• “1090 PCI Express Mini Card for wireless LAN/WAN” on page 45

•• “1100 Keyboard” on page 47

•• “1110 Keyboard bezel” on page 49

•• “1130 System board and ExpressCard slot assembly” on page 54

•• “1140 LCD unit” on page 58

•• “1160 LCD front bezel” on page 64

•• “1170 LCD panel and hinges” on page 65

Figure 19. Removal steps of antenna assembly and LCD cover

Peel off the adhesive tapes securing the antenna boards, release the

cables from the cable guide, and then remove the antenna assembly in the direction shown by arrows 1.

1

1

When installing: Route the antenna cables along the cable guides and secure

the antenna boards with adhesive tapes. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

68