TAPE PLAY
1. Check whether or not the tape is tight before it is
inserted.
To keep the tape from tangling, firmly wind the tape before inserting it into the player.
Use of a cassette with
more than 90 minutes,
such as C-120 (120
minutes), is not
recommended. The extreme thinness of this tape may damage this set.
2. Open the cassette door by hand, face the side to be played toward you, and insert the cassette tape. Close the cassette door.
3. Connect the headphones to the HEADPHONE jack and adjust the headphone band for proper fit.
4. Press the PLAY button.
5. Adjust the VOLUME to control the sound level you like.
6. To skip portions of the cassette tape, press the FAST FORWARD button.
7. To stop playing, press the STOP button, and the power source is also shut off.
(This set has a built-in auto-stop and the tape mechanism will stop playing and shut off when it reaches the end of the tape.)
8. To hear the other side of tape, flip it over and press PLAY.
TO INSERT THE TAPE
1.Open the cassette door by holding the door as shown and gently pulling it to you.
2.Insert a recorded tape into the cassette holder ON THE DOOR.
3.Close the cassette door gently till it clicks shut.
CAUTION: Do not pull door too strongly, or you may damage the door. Treat this set with care and it will last a long time.
3
