Lenoxx Electronics 8980 FM manual Cleaning Tape Head, To Play a Cassette Tape

CLEANING TAPE HEAD

If the sound drops out or excessive noise occurs, clean the magnetic head, capstan and pinch roller with a cotton swab moistened with alcohol.

TO PLAY A CASSETTE TAPE

PINCH ROLLER MAGNETIC HEAD

CAPSTAN COTTON SWAB

1. Check if the tape is tight before it is inserted.

To keep the tape from tangling, firmly wind the tape before inserting it into the player.

2.Open the cassette door by hand, face the side to be played towards you, and insert the cassette tape. Close the cassette door.

3.Connect the headphones to the Headphone Jack (marked “Phones”) and adjust the headphone band for proper fit.

4.Press the Play Button.

5.Adjust the Volume Control to the sound level you like.

6.To skip portions of the cassette tape , press the Fast Forward Button.

7.To stop playing the cassette tape, press the Stop Button, and the power source is also turned off.

(This set has a built-in auto stop. The tape mechanism will stop playing and shut itself off when it reaches the end of the tape.)

8.To hear the other side of tape, flip it over and press Play.

TO HEAR THE SAME SONG AGAIN

1.Remove the tape, flip it around to the other side and insert it.

2.Press the Fast Forward Button for a short time.

3.Remove tape, flip it around to the original side, re-insert and press Play.

TO USE THE STEREO SPERKERS

To use the speakers as a desk-top cassette player, simply plug the speakers plug into the Headphone Jack (marked “Phones”). Adjust the Volume to the level you like.

--- 3 --- 8980-FM-052699 v.1 E