CHOOSING THE POWER SOURCES
You can use the AC power or batteries as a power source.
AC SOCKET
To a wall outlet
Battery compartment
(on the bottom of the set)
TIP
If the plug of the AC power cord does not match your outlet, do not force it.
Reverse it and try again. The plugs are polarized and only fits one way into the wall outlet and back of the set.
TIP
NOTE: One blade of plug and outlet is wider.
1. Connecting the AC power cord
Insert one end of the supplied AC power cord (located in the battery compartment) into the socket located at the rear of the player, and the other end to the wall outlet.
2. Using the player on batteries
Insert 6 size “D” batteries (not supplied) into the battery compartment.
To use the player on batteries, disconnect the AC power cord from the player.
Replace the batteries when the POWER lamp dims or when the player stops operating. Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the player and remember to check the Battery Safety Instructions on Page 3.
+
+
+
+
+
+
REMOVE
BATTERY
DOOR
