MP3 PROGRAMMED PLAY
The tracks (songs) on the disc can be programmed (arranged in advance) to play in any order you prefer (up to 20 tracks can be programmed).
Programming Example |
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
| etc. |
Program Number | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
|
|
|
|
|
|
|
|
| etc. |
Album Number (title number) | 3 | 6 | 10 | 4 | 1 | 7 | 2 | 5 | |
|
|
|
|
|
|
|
|
| etc. |
Track Number (song number) | 3 | 5 | 8 | 1 | 2 | 4 | 1 | 1 | |
|
|
|
|
|
|
|
|
|
|
During programming, the word PROGRAM shows in the display. To program play in your preferred order, follow steps below:
1. Slide the FUNCTION switch to the MP3/CD position.
Make sure the set is in STOP mode.
album number
2. Press the PROGRAM button once, the album number “ 
” will flash in the display.
3.Press the SKIP/SEARCH buttons ( 
or 
) to select album number, then press the PROGRAM button,
the letters “ 
” will flash. Press the SKIP/SEARCH buttons to select the track number to be programmed.
4.Press the PROGRAM button to confirm, the programmed number will show in the display, and ready for the next selection of track.
5.Repeat above steps 3 and 4 to program other tracks till you finish.
6.After programming is finished, press the PLAY button to begin programmed play.
NOTE:
1. Programming can only be done in STOP mode.
track number
programmed 
number
2.The programmed memory will be lost if the STOP button is pressed twice, or the alkaline batteries are exhausted or removed, or AC power is shut off, or the CD DOOR is opened.
3.The player will stop automatically after all programmed tracks have been played.
To change the current program
Just create a new program following the programming procedure.
To cancel programmed play
Press the STOP button twice, the word PROGRAM will vanish from the display.
12IB-CD208(LC)-WM-E-060403
