IB-CD2087(AD)-WC-E-062906
MP3 PROGRAMMED PLAY
During programming, the symbol
“PROG”
shows in the display. To program play in your
preferred order, follow steps below:
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
NOTE:
1. Programming can only be done in
STOP
mode.
2.The programmed memory will be lost if the STOP button is pressed twice, or the
alkaline batteries are exhausted or removed, or AC power is shut off, or the CD
DOOR is opened.
3.The player will stop automatically after all programmed tracks have been played.

To cancel programmed play

Press the STOP button twice, the symbol
PROG
will disappear from the display.

To change the current program

Just create a new program following the programming procedure.
11
Programming Example
Program Number 12 3 4 5678
etc.
etc.
etc.
Track Number (song number) 3 5 8 1 241 1
Album Number (title number) 3 6 10 4 1 7 25
1.Slide the FUNCTION switch to the CD/
MP3/AUDIO IN position. Make sure the
set is in
STOP
mode (the total album
number and track number show in the
display).
2.Press the PROGRAM/EQ button, the
symbol “
PROG
” will show in the display
and the album number “ ” will flash.
PROG
3.Press the SKIP/SEARCH ( or )
buttons to select the title number 3
(example).
PR