Lenoxx Electronics CD-87 operating instructions Power Sources, Using with Batteries

Models: CD-87

1 16
Download 16 pages 59.7 Kb
Page 4
Image 4

POWER SOURCES

3

1.Using with Batteries

 

Insert two size “AA” alkaline batteries according to the + and - markings in the BATTERY COMPARTMENT.

TIPS ON BATTERY USE

Reversing polarities will damage the batteries and possibly your set. Be sure to follow polarity ( + and - ) as indicated.

Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.), or old batteries with new ones.

When not in use for an extended period of time, or while internal batteries will not be used, remove them to prevent possible acid leakage or corrosion resulting in damage to your player.

When the batteries have become discharged, they must be disposed of in a safe manner that complies with all applicable laws.

Installation of batteries should only be done by an adult (for safety).

ALKALINE BATTERY LIFE

Bear in mind that battery life expectancy is based upon volume and bass listening levels.

Maximum battery power consumption happens at maximum settings. Typical life for 2 size “AA” alkaline batteries is above 8 hours of continuous use.

WHEN SHOWS OR FLASHES IN THE DISPLAY

If the alkaline batteries are weak and discharged, this symbol “

” shows or

flashes in the display, then the power automatically turns off. If this occurs, replace the alkaline batteries (also if display does not show anything, the batteries are dead).

NOTE: You may use rechargeable batteries on this set. However, because rechargeable batteries generally have lower voltage (1.2 volts instead of

1.5volts). Your playing time will be much less than normal fresh alkaline batteries.

CD87(12A-45J2)010801 NL v.1 E

Page 4
Image 4
Lenoxx Electronics CD-87 operating instructions Power Sources, Using with Batteries