Power Sources, Using With Batteries | Lenoxx Electronics CD-895

POWER SOURCES

Power this CD player by inserting 2 size “AA” fresh alkaline batteries, or using the provided Cigarette Lighter Adaptor.

1. USING WITH BATTERIES

Insert 2 size “AA” alkaline batteries according to the + and - markings on the bottom of the set.

NOTE: Player will not work, and batteries will be drained, if batteries are not inserted as shown on the bottom of the set.

TIPS ON BATTERY USE

•Reversing polarities will damage the batteries and possibly your set. Be sure to follow polarity ( + and - ) as indicated.

•Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.), or old batteries with new ones.

•When not in use for an extended period of time, or while internal batteries will not be used, remove them to prevent possible acid leakage or corrosion resulting in damage to your player.

•When the batteries have become discharged, they must be disposed of in a safe manner that complies with all applicable laws.

•Installation of batteries should only be done by an adult (for safety).

ALKALINE BATTERY LIFE

Bear in mind that battery life expectancy is based upon volume and bass listening levels.

Maximum battery power consumption happens at maximum settings. Typical life for 2 size “AA” alkaline batteries is above 8 hours of continuous CD play.

2.AC ADAPTOR (OPTIONAL)

You can also power this CD player by connecting an optional AC adaptor. Before you buy an optional AC Adaptor, please note, the only AC ADAPTOR suitable for this player

is DC 4.5V 600mA (or greater), with plus center polarity . Others may damage your player. Please check voltage and current (mA) before buying an AC ADAPTOR.

WHEN SHOWS IN THE DISPLAY

While the CD is playing, if the alkaline batteries are weak or discharged, this symbol

“ ” shows or flashes in the display, then the power automatically turns off. If this occurs, replace both alkaline batteries (also if the display does not show anything, the batteries are dead).