POWER SOURCES1.Using Battery Power

TIPS ON BATTERY USE

Reversing polarities will damage the batteries and possibly your set. Be sure to
follow polarity ( + and - ) as indicated.
Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.),
or old batteries with new ones.
When not in use for an extended period of time, or while internal batteries will not
be used, remove them to prevent possible acid leakage or corrosion resulting in
damage to your player.
When the batteries have become discharged, they must be disposed of in a safe
manner that complies with all applicable laws.
Installation of batteries should only be done by an adult (for safety).

WHEN THIS SYMBOL SHOWS IN THE DISPLAY

If the alkaline batteries are weak and discharged, this symbol   shows in the
display, then the power automatically turns off. If this occurs, replace the alkaline
batteries (also if display does not show anything, the batteries are dead).

ALKALINE BATTERY LIFE

Bear in mind that battery life expectancy is based upon volume and bass listening
levels.
Maximum battery power consumption happens at maximum settings. Typical life
for 2 size AA alkaline batteries is above 8 hours of continuous use.
Insert two size AA alkaline batteries
according to the + and - markings in
the battery compartment.
3
NOTE: You may use rechargeable batteries on this set. However, because
rechargeable batteries generally have lower voltage (1.2 volts instead of
1.5 volts). Your playing time will be much less than normal fresh alkaline
batteries.
AA
+
AA
+