5. Playing CD in programmed order
You can make a program of up to 20 tracks in the order you want them to be played.
PROGRAM
lamp
PROGRAM
button
1. Press the POWER button to turn on the power and slide the FUNCTION switch to CD position. Make sure the CD is stopped.
2. Press the PROGRAM button. The letters “P01” will show and the PROGRAM lamp will flash.
3. Press 
or
to select the tracks you want to program in the order you want.
4. Press the PROGRAM button to confirm. The letters “P02” will show.
5. Repeat steps 3 and 4. You can program up to 20 tracks.
6. Press 
to start programmed play. The
PROGRAM lamp will show steadily on the display.
To change the current program
Just create a new program following the programming procedure.
To cancel Programmed Play
Press the STOP button to stop programmed play. Press the STOP button again after pressing the PROGRAM button or press the CD DOOR OPEN button to open the CD door, and the PROGRAM lamp goes off.
7
