CALLER ID FEATURES
Calling Back From the Caller ID List
1.Display the phone number you want to call back using the UP or DOWN button.
2.Press the DIAL button, the phone number will show on the display.
3.Press the OPTION button to choose the number of
-1 + area code + phone number), different parts of the country have different dialing systems even for local calls.
4.Pick up the HANDSET or press the SPEAKERPHONE button.
5.Press the DIAL button, the phone will dial the number displayed.
Storing the Phone Numbers from the Caller ID List
As the phone keeps the data of up to 70 calls, if the 71st call comes in, the phone deletes the oldest data automatically.
To prevent important data from being deleted, you can store them into the 13 speed dial memories (3
1.Display the phone number you want to store (by pressing UP or DOWN button).
2.Press STORE button. The call number is repeated in the display.
3.Press the OPTION button to change the memory dial digit
4.For | For |
Press a | Press the AUTO button, and then one |
(M1 to M3). | of the speed dial memories (0 to 9). |
|
|
The phone number is now stored in that memory button (NOTE: Only the number will be stored, not the name).
NOTE:
1.Do not allow more than 3 seconds to elapse between each step of the procedure.
2.If the phone is connected to a Private Branch Exchange (PABX), you may need to add an outside line access digit or a pause, see page 10.
Deleting the Data from the Caller ID List
To delete the Caller ID memory one by one
1.Display the Caller’s ID you want to delete (by pressing UP or DOWN button).
2.Press the DELETE button quickly twice, the display changes to show the next or previous call, and the data is deleted.
To delete ALL the Caller ID memories
1.Press the UP or DOWN button to display any call, make sure the display does not show “ END OF LIST ”.
2.Press and hold the DELETE button down for 6 seconds. Display changes to “ NO CALLS ” and all the Caller ID memories are deleted.
Using Message Waiting/Mailbox
To use the Message Waiting indication feature, you must subscribe to this service if avail- able from your local telephone company.
Your
1.If the message is sent by the telephone company which is preceded by a ring, the message
waiting symbol 
will appear on the display, and the NEW CALL INDICATOR will flash.
2.After you have retrieved your message(s), the telephone company will send a clear signal
(by a ring) to your phone. The message waiting symbol 
and the NEW CALL INDICATOR will turn off, and display shows “ MSG WAITING OFF ”.
3.Sometimes the telephone company will not send a message clear signal to you, and you have to clear the message waiting record manually. Just press and hold the
DELETE button down and then press the UP button, the message will be cleared. The
message waiting symbol 
and NEW CALL INDICATOR will be off.
12 |
| |
|
