OPERATING ON TV 1. Selecting Band

Turn on the TV set by sliding the POWER switch to ON position. Then you may select a desired band by sliding the BAND selector to different positions:

VL: to select the VHF low channel TV broadcast stations (channels 2 to 6)

VH: to select the VHF high channel TV broadcast stations (channels 7 to 13)

UHF: to select the UHF all channel TV broadcast stations (channels 14 to 83)

2. Tuning into Desired Station

You may tune into a desired station by adjusting the TUNING control.

3. Adjusting for Best Picture

If the picture is too bright or too dark, adjust the BRIGHTNESS and CONTRAST controls (located on the rear of the unit).

4. Vertical Hold

If the picture rolls up and down, adjust the VERTICAL HOLD control on the rear of the unit.

5. Volume Level

You may adjust the VOLUME control to get the sound level you like.

USING A EARPHONE

You may enjoy your TV or radio sound

 

without disturbing others by a mono

MONO EARPHONE

earphone (not included).

7IB-TV504-E-V1

Page 8
Image 8
Lenoxx Electronics TV-504 operating instructions Operating on TV 1. Selecting Band, Using a Earphone