This feature allows you to make Servers on your LAN accessible to Internet users.
Normally, Internet users would not be able to access a server on your LAN because:
Figure 54: Port Range Forwarding Screen
Data - Port Range Forwarding Screen
Port Range Forwarding
Enter the desired application type.
Application
Enter the beginning of the range of port numbers used by the
application server.
Start
Enter the end of the range of port numbers used by the
application server.
End
Select the protocol (TCP or UDP) used by the Server.
Protocol
Enter the desired IP address.
IP Address
Enable Use this to Enable or Disable support for this Server, as
required.
71