2.4.LED / System Status
FNS-5000B provides LED indicators for you to indicate system status and information easily. When FNS-5000B is turned on, please check the following items to make sure system status is normal. Note that the following LED information is applicable only when you have properly installed HDD1 and/or HDD2, and connected FNS-5000B to the network and power.
1 | 2 | 3 | 4 | 5 | 6 |
n USB Status | | | | | | |
o Status | | | | | | |
p HDD1 | | | | | | |
q HDD2 | | | | | | |
r LAN | | | | | | |
s Power | | | | | | |
| | | | | |
| LED | | System starting up | | System has started |
| | | | | | | |
| nUSB | It shows when USB connected | | |
| | | | |
| oStatus | Blink in red (short beep once) | | |
| Æ Blink in green (long beep | | Green |
| | once) | | | | | |
| | | | | | |
| p/qHDD 1/ HDD 2 | Orange | | | | Off |
| | | | | | |
| rNetwork (LAN) | Blink in orange | | | | Orange |
| | | | | | | |
| sPower | Blue | | | | | Blue |
| | | | | | | |
