Ethernet Ports (Port 5~8):
These ports support network speeds of either
10Mbps or 100Mbps, and can operate in half-
and full- duplex transfer modes. These ports
also supports automatic MDI/MDIX crossover
detection function gives true “plug and play”
capability, just need to plug-in the network
cable to the hub directly and don’t care if the
end node is NIC (Network Interface Card) or
switch and hub
DC Power Jack:
Power is supplied through an external DC
power adapter. Check the technical
specification section for information about the
DC power input voltage.
Since the switch does not include a power
switch, plugging its power adapter into a power
outlet will immediately power it on.
5