LevelOne GSW-0840T, GSW-0440T manual Port Config, Mirror Config

LevelOne GSW-0840T

8-Port Gigabit Smart Switch

===========================

Speed/Dpx LinkStatus

===========================

P1	1000/F	Off
P2	1000/F	Off
P3	1000/F	Off
P4	1000/F	Off
P5	1000/F	Off
P6	1000/F	Off
P7	1000/F	Off
P8	1000/F	Off

<+>:Next Item	<->:Back
<ESC>:Exit	<Enter>:Toggle
	Version A1

Users can only monitor the following status items: Speed/Dpx, LinkStatus.

7.3Port Config

You can set each port’s Flow-Control function and its priority.

LevelOne GSW-0840T

8-Port Gigabit Smart Switch

===========================

	FlowControl	Priority
===========================
P1	Enable	Disable
P2	Enable	Disable
P3	Enable	Disable
P4	Enable	Disable
P5	Enable	Disable
P6	Enable	Disable
P7	Enable	Disable
P8	Enable	Disable

<+>:Next Item	<->:Back
<ESC>:Exit	<Enter>:Toggle
	Version A1

For Flow-Control, follow IEEE802.3x Flow-Control standard, you can set to Enable or Disable the flow control function. For Port Priority, you can set it up as Disable, Class 0, Class 1, Class 2, Class 3.

7.4Mirror Config

Port Mirroring means setting up a monitored port so that data flowing through that port is copied to the snooping port. The port used to monitor other port is called the Snooping port. The port being watched is called the Mirrored Port. The Switch is able to monitor one port at one time. The transmitting and receiving direction can be monitored exclusively. Be sure to activate this function before setting port selection and direction.

14