Wireless LAN Access Point Configuration
4. User can start configuring the Access Point.
From Wireless Station
1. Make sure user’s wireless station is in the same subnet with the Access Point.
Please refer to the step 1 above for configuring the IP Address and Sub Mask of the
wireless station.
2. Connect to the Access Point.
The Access Point’s default ESSID is “default” and the WEP Encryption function is
disabled. Make sure user’s wireless station is using the same ESSID as the Access
Point and associate user’s wireless station to the Access Point.
3. Enter 192.168.2.1 from Web Browser to get into the Access Point’s configuration
tool.
4. Enter the user name and password and then press OK button and user are available
to configure the Access Point now.
9