Refill Instructions - Lexmark 10N0217 (No.17)
Order your
Refill PACKs at:
fig.1 | fig.2 |
www.refill4.com
fig.3
LexmarkAll in One X72 . X74 . X75 . X1130 . X1150 . X1180 |
|
. X225 |
|
Color Jetprinter Z13 . Z23 . Z25 . Z33 . Z34 . Z35 . Z515 . |
|
Z601 . Z605 . Z615 |
|
Items Required |
|
Original Lexmark 17 Cartridge, Syringe & FillingTube |
|
Black Ink 10ml |
|
Instructions | Black |
1.Assemble syringe and steel filling tube and fill with
appropriate colour ink(g. .2) | fig.4 |
2.Remove the top from the black ink bottle and using
the syringe remove 10ml of black ink(g.3) | Refilling |
3. The filler hole is located on top of the cartridge. | Hole |
(g.4) |
|
4.Insert the steel filling tube into the appropriate filling holes. (g.5). Push down into centre of the sponge. IMPORTANT: Cartridge contains a sponge and a slight resistant may be felt.
5.SLOWLY Inject ink. When ink overflows from filling hole or starts to leak from print heads cartridge is full. Stop injecting immediately.
Blot printer heads with tissue before continuing to fill next colour.
IMPORTANT: Clean syringe with water and dry | fig.5 |
| |
before refilling next colour. |
|
6.After refilling replace label back over filling hole.
7.Leave the cartridge to stand overnight on non- absorbent surface this will ensure no
leakage and give the ink time to fully saturate the sponge.
IMPORTANT: DO NOT LEAVE ON TISSUE.
8.Install cartridge and run a priming cycle.
PLEASE NOTE: The ink indicator level may need to be turned of. Check your HPinstructions manual for details.