Getting Started
1
IntroductionThank you for purchasing the LexmarkTM N1 Ethernet
Adapter, the solution to all your printer sharing needs!
The adapter makes it easy for you to:
•Share your printer between two or more network
computers.
•Locate your printer anywhere in your home or office.
You no longer need to locate the printer next to a host
computer or make sure a host computer is powered
on before sending your print job from a remote
location.
•Quickly transfer information.
Your new adapter has the capability to transfer
information at up to 100 Mbps.
SetupFor setup, you need:
•The Lexmark N1 Ethernet Adapter
•An existing Ethernet (10/100 BaseTX) network
•An Ethernet (RJ-45, category 5) cable, purchased
separately
•A network-capable Lexmark printer
To find out if your printer is network-capable or for
other printer-specific information, refer to the
documentation that came with your printer or visit our
Web site at www.lexmark.com.
•The printer software CD that came with your printer
•A computer with a CD-ROM drive
The computer must be connected to the network,
have TCP/IP active and running, and have one of the
following operating systems:
–Windows 98
–Windows Me
–Windows 2000
–Windows XP (32 bit only)
–Mac OS 8.6 to 9.2
–Mac OS X version 10.0.3 to 10.1