DVI-PC OUTPUT AUDIO
HDMI/DVI IN
AUDIO
(RGB/DVI) IN
25
EXTERNAL EQUIPMENT SETUP
When connecting with a HDMI to DVI cable(Only 19/22LS4R*)
Connect the DVI output of the PC to the HHDDMMII//DDVVII
IINN jack on the set.
Connect the audio cable from the PC to the AAUUDDIIOO
((RRGGBB//DDVVII)) IINNsockets of the set.
Select HDMI/DVI (PC) input source with using the
IINNPPUUTTbutton on the remote control.
2
3
1
1
2
NOTE
!
GGIf the set is cold, there may be a small “flicker”
when the set is switched on. This is normal, there
is nothing wrong with the set.
GGIf possible, use the VESA 1280x1024@60Hz
(17LS5R *), 1440x900@60Hz (19LS4R *),
1680x1050@60Hz (22LS4R *) video mode to
obtain the best image quality for your LCD moni-
tor. If used under the other resolutions, some
scaled or processed pictures may appear on the
screen. The set has been preadjusted to the
mode VESA 1280x1024@60Hz(17LS5R *),
1440x900@60Hz (19LS4R *),
1680x1050@60Hz (22LS4R *).
GGSome dot defects may appear on the screen, like
Red, Green or Blue spots. However, this will have
no impact or effect on the monitor performance.
GGDo not press the LCD screen with your finger for
a long time as this may produce some temporary
distortion effects on the screen.
GGWhen the PC screen appears on the set, a mes-
sage may appear on the screen, and the message
will differ according to the Window system ver-
sion. If a message appears click “Next” until the
message finishes.
GGIf the message “No signal” appears on the
screen, adjust the PC as in the ‘Displayable
Monitor Specification’ section.
Ofrecido por www.electromanuales.com
Downloaded From TV-Manual.com Manuals