EXTERNAL EQUIPMENT SETUP
27
Screen Setup for PC modeOverview
When the RGB input of the set is connected to a PC output, select
the RGB-PC as the main input mode.
When HDMI connect to PC output and select HDMI/DVI input, this
function is used.
After connecting RGB-PC or HDMI/DVI to PC ouput and checking
the screen quality.
When you change the resolution, select the proper resolution in pre-
sent input to see the best picture appearance.
Initializing (Reset to original factory values)
Press the AADDJJUUSSTTbutton and then use DD or EEbutton to
select RReesseett.
Press the EENNTTEERR button and then use FFor GG button to
select YYeess.
Press the EENNTTEERRbutton.
To initialize the adjusted values
ENTER
ADJUST
CC
MENU EXIT
1
2
3
123
123
Resolution
Position
Size
Phase
Reset
Initialize Settings
Yes No
Resolution
Position
Size
Phase
Reset
Move
Close Ok
FFGG
DD
EE
MENU
1024 x 768
1280 x 768
1360 x 768
1366 x 768
RReessoolluuttiioonn
This function allows you select
resolution of XGA/WXGA.
PPoossiittiioonnThis function is to adjust picture to
left/right and up/down as you prefer.
SSiizzeeThis function is to minimize any ver-
tical bars or stripes visible on the
screen background. And the hori-
zontal screen size will also change.
PPhhaasseeThis function allows you to
remove any horizontal noise and
clear or sharpen the image of char-
acters.
Move
Close Ok
FFGG
DD
EE
MENU
Adjustment for screen Resolution, Position, Size,and Phase
Press the AADDJJUUSSTTbutton and then use DD or EEbutton to
select RReessoolluuttiioonn, PPoossiittiioonn, SSiizzee, or PPhhaassee.
Press the EENNTTEERRbutton and then use DD EE FFGG button to
make appropriate adjustments.
■The PPhhaasseeadjustment range is --1166 ~++1166.
In HDMI/DVI-PC mode, PPhhaassee is not available.
■The SSiizzeeadjustment range is --3300 ~++3300.
In HDMI/DVI-PC mode, SSiizzeeis not available.
Press the EENNTTEERRbutton.
1
2
3