LGE Internal Use OnlyCopyright ©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes - 6 -
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.

4. General specification

1. Application range

This specification is applied to the LCD TV used LD91D
chassis.

2. Requirement for Test

Each part is tested as below without special appointment.
1) Temperature : 25±5ºC (77±9ºF), CST : 40±5ºC
2) Relative Humidity : 65±10%
3)
Power Voltage : Standard input voltage(100~240V@50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.

3. Test method

1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE/IEC specification
- EMC: CE/IEC
No Item Specification Remark
1 Display Screen Device 32 wide Color Display Module LCD
2 Aspect Ratio 16:9
3 LCD Module 32” TFT LCD FHD 100Hz LGD
4 Operating Environment Temp. : 0 ~50 deg
Humidity : 20 ~90 %
5 Storage Environment Temp. : -20 ~60 deg
Humidity : 10 ~90 %
6 Input Voltage AC100-240V~, 50/60Hz
7 Power consumption Power on (White)
32” LGD Typ : 110, Max : 120 LCD(Module) + Backlight(Lamp)
8 Module Size 32” LGD 760.0(H) x 450.0(V) x 48.00mm(D) With inverter
9 Pixel Pitch 32” LGD 0.36375(H) x 0.36375(V)
10 Backlight 16 EEFL
11 Display Colors 1.06B(true) colors
12 Coating 3H(Hard coating)
Downloaded From TV-Manual.com Manuals