Custom Master TV Setup
This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in
Note: Cloning requirements and procedures are described in detail on pages 37 to 41. Refer to FTG Mode information on pages 42 to 48 for details on entering FTG Mode and configuring/editing the FTG Channel Map and FTG Installer Menu settings.
Before You Begin
•It is recommended that you disconnect all Aux inputs if you intend to run Auto Tuning (Channel Search). Under certain conditions, Auto Tuning is disabled if there is an Aux input active.
•All Learning and Teaching processes on these TV models are performed via USB memory device. See “Cloning Methods” below to determine the type of
Cloning Methods
See also “Clonable TV Setup Menu Features” list below.
Using a USB Memory Device / TLX File
•The TLX file format clones Installer Menu settings, IP Environment Menu settings (with the exception of network settings and the TV name), and all TV sources’ (analog, digital, AV1, HDMI, etc.) clonable setup menu settings.
•Not intended for cloning an
Using a USB Memory Device / TLL File
The TLL file format only clones the contents of the commercial controller (PTC) memory, which is limited to an
Clonable TV Setup Menu Features
Channel | Audio | Time | |
Auto Tuning (Channel Lineup) | Sound Mode * | Clock Mode (Auto/Manual) * | |
Manual Tuning | Volume Mode | Time Zone | |
Channel Edit | Virtual Surround | Auto Off | |
Channel Label | Clear Voice | Option | |
Picture | AV Sync * | ||
Language | |||
Sound Setting | |||
Picture Mode * | Caption | ||
| |||
|
| Pointer * |
*Advanced Control & Picture Option (Picture Mode), User EQ (Sound Mode), AV Sync, DST (Clock Mode), and Pointer settings are cloned via TLX file only.
Note: Some menu options vary between analog and digital channels and Aux inputs.
32 |