Cloning Procedures (Cont.)

Learn Setup from Master TV

1.Ensure the Master TV is set up completely and in Pass-through Mode (i.e., the TV setup menus should be displayed when you press MENU SETTINGS on the Installer Remote).

2.Insert the USB memory device into either of the USB ports on the Master TV.

3.Press MENU SETTINGS on the Installer Remote to display the TV setup menus. Use the arrow navigation keys to select/highlight the Option menu icon, and then press the number “7” key a total of seven times to display the USB Download Menu.

4.To gain access to the “Learn From TV” options in the USB Download Menu, key in the following number sequence on the Installer Remote: 9-8-7-6.

5.Use the Up/Down arrow keys to select Learn From TV (TLX), and then press OK.

6.In the Learn From TV (TLX) window, to differentiate this TLX file from others, you can use the Up/Down arrow keys to change the last five digits of the filename. Press OK when you are ready to initiate Learning.

Learning status will be shown on a progress bar in a new window. Do NOT remove the USB device until Learning is complete. When the Learning process is complete, the USB Download Menu will reappear on the screen.

7.When Learning is done, press on the Installer Remote to exit the USB Download Menu, and remove the USB memory device from the Master TV.

Teach Master TV Setup to Target TV

1.Turn ON the Target TV.

2.The next step depends on whether the EZ-Manager Wizard appears on the screen when you turn ON the TV:

•If the wizard is displayed, the TV is in the required factory default state. To continue with this procedure (see also note below), exit the wizard, and then continue with step 3.

•If the wizard is not displayed, restore the TV to a factory default condition before continuing with this procedure. See Reference section, “Restoring Factory Defaults on the TV(s),” as necessary, for further information.

Note: If desired, you can complete the Teaching process via the EZ- Manager Wizard (see “USB Configuration” on pages 18 to 19) or using the LG Smart Install utility (see “LG Smart Install Utility” on pages 20 to 21).

USB Download Menu

Upgrade TV Software

Upgrade PTC Software

Diagnostics

Teach To TV (TLL)

Teach To TV (TLX)

Learn From TV (TLL)

Learn From TV (TLX)

Previous

OK

Note: The Diagnostics option in this menu is for service use only.

Learn From TV (TLX)

Select the file name and press OK to start

V

 

xxLY750H-UA00003.TLX

 

V

 

Previous

OK

Learn From TV

UPDATING...

25%

Do not unplug!

(Continued on next page)

38

206-4263