Reference: Auto Input(s) Sensing Feature
This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual inputs), refer to the table on the following page.
Note: When both item 042 AUTO INPUTS and item 041 SIMPLINK EN are enabled in the Installer Menu, HDMI inputs will be detected by SIMPLINK, but the Auto Input(s) Sensing Feature will not function.
In the Installer Menu, an informational code is displayed at the right of each Auto Inputs value, for example:
xxLY750H PTC INSTALLER MENU
CPU-CTV
| 042 | AUTO INPUTS | 225 765XXXX0 | | |
| | |
| | | | | |
| UPN | 000-000-000-000 | ASIC D279 | |
| PTC | V1.00.015 | CPU V3.11.00 | |
| | | | | |
AUTO INPUTS Display Code
This example illustrates Installer Menu item 042 value 225, which enables auto-sensing for all available Aux inputs. The input #s in the display code (7, 6, 5, 0 in this example) identify the enabled Aux inputs. See table below for a listing of the LY750H Aux inputs and their corresponding display code input #s. The table on the following page shows the display codes for all item 042 values.
Each code consists of eight characters that identify the Aux input(s) for which auto-sensing is enabled. The following table identifies the Installer Menu display code Input # for each Aux input that is available on the LY750H TV models. The table also identifies the Installer Menu item associated with each Aux input. Remember that in order for auto-sensing to be enabled for an input, that input must also be enabled in the Installer Menu.
Installer Menu | Aux | | Installer Menu |
Display Code | Input | | | |
Item | | Function |
Input # | | |
| | | |
0 | AV1 | 039 | | REAR AUX EN |
6 | HDMI 1 | 035 | | HDMI1 ENABLE |
7 | HDMI 2 | 091 | | HDMI2 ENABLE |
5 | HDMI 3 | 092 | | HDMI3 ENABLE |
