Zone and Room Number Assignments
You may complete one or more of the fields in the Zone, Label, and Room Number screen or leave them blank, as desired; however, in order to use the Zoning feature on this TV, you MUST set the TV Zone # as described below. See Reference section, “Using the TV Zoning Feature,” for further information on Zone designations. Note that the Zoning feature is only applicable for TVs that will be configured for FTG Mode via CPU (using an FTG Configuration [.tlx] file) or for TVs that will be configured via “Teaching” (cloning) using a USB memory device / .tlx file.
1 2 3 4
Zone, Label, and Room Number
•If creating Zones for Installer Menu settings and/or Channel Mapping, select the appropriate Zone #
•Select a Label and/or use the alphanumeric keypad on the remote to input the Room Number.
•When done, select ‘Next’ to continue.
Zone | Label | Room Number | 1 | 2 | 3 |
|
|
|
|
|
| 1 | 2 | 3 | |||
|
| 4 | 5 | 6 | ||||
0 |
| 4 | 5 | 6 | ||||
|
|
|
| 7 | 0 | 9 | ||
|
|
| 7 | 8 | 9 | 8 | ||
|
|
|
|
|
| |||
|
|
| CHAR/ | 0 | DEL | VOL |
| CH |
|
|
| NUM |
|
|
|
| |
Exit | USB Configuration | Zone & Room Number |
|
| Next |
|
|
|
1.Complete the appropriate field(s) as described below. Use the Left/Right arrow keys on the Installer Remote to navigate between each of the fields.
•Zone: Enables you to set a TV Zone # so that the TV can be configured with Installer Menu and/or TV Setup Menu settings intended only for the assigned Zone. The Installer Menu and/or TV Setup Menu settings may be provided in a .tlx file to be used either for Teaching (cloning) or FTG Mode via CPU configuration. If the TV is being configured for FTG Mode via CPU, the TV Zone # setting also allows the TV to omit channels that have been restricted in the FTG Channel Map. To set a TV Zone, navigate to the Zone field at the left of the screen, and use the Up/Down arrow keys to specify a TV Zone #
•Label: Allows you to select a North, South, East, or West text label for this TV. In the Label field, use the Up/Down arrow keys to select the applicable label.
•Room Number: Allows you to specify the number of the room in which the TV is located. In the Room Number field, you can use the number keys on the Installer Remote to direct enter a room number. Use the Dash key on the Installer Remote as necessary to toggle between number and letter characters in the Room Number field. Also, you can use the Flashback key on the Installer Remote to delete characters in this field.
2.When you are ready to continue, select the appropriate option, as follows:
•To proceed to the next
•If you wish to use a USB memory device in conjunction with the TV’s standard USB Down- load Menu to complete the configuration, continue to “USB Configuration” on page 17.
•If you wish to use a USB memory device in conjunction with the LG Smart Install utility to complete the configuration, see “LG Smart Install Utility” on pages 18 to 19.
14 |