5. RF Pairing / Un-pairing Method

Method Description

RF Pairing
Method1
If unpaired, just press "OK" button.
If paired, press "OK" button after
unpairing.
Method 2 (Repairing)
– Press “BACK" button for 5 sec.
When do pairing, the remote
should make pairing request IR
signal(0x75) to TV.
When TV receive the IR signal, it
should send "pairing request
packet" to the RF receiver.
After pairing success, the remote
should blink LED for some time and
TV send "pairing success packet"
back to TV.
When remote try to unpairing, it
doesn’t care about state of
receiver(stand alone).
RF Unpairing Press “BACK" button and “SMART" button
at the same time for 5 sec.
When remote try to unpairing, it
doesn’t care about state of
receiver(stand alone).
After unpairing, all pairing
information should be erased.
After unpairing, LED should be
blinked for 3sec.
The remote just becomes to IR
mode.