Express Script Installer Menu Wizard (Cont.)

(Continued from previous page)

When you are finished, press MENU to close the pop-up window. Use the arrow keys to select Next, and then press OK.

8.Completion.

In the final step, the TV saves your settings and transfers the setup to the commercial controller (PTC). (This is similar to 2-5-5 + MENU Mode during Custom Master TV Setup.) When this step is complete, the Express Script Installer Menu Wizard closes.

Note: If desired, you can save the TV Setup created using the Express Script to a USB memory device / TLL file for transfer to Target TVs. See “Learning / Teaching a Master TV Setup using a TLL File” on pages 44 to 45.

Note: If access to the channel lineup has been limited at the completion of the Express Script (see step 5) and you would like to set up channel banks at a later time, you will need to set Installer Menu item 028 CH. OVERIDE to 1 to enable access to the Channel Preview/Banks Setup Menu. See pages 37 to 40 for further information on channel banks.

Note: You can also edit/add channel icons and/or custom text labels in

2-5-4 + MENU Mode after the Express Script is completed, if necessary. See page 36 for further information.

Installer Menu Wizard

1 ► 2 ► 3 ► 4 ► 5 ► 6 ► 7 ► 8

Step 8. Completion

Easy installation complete.

Save data… 50%

PTC: V1.00.020 CPU: V03.11.00.01 ASIC: D279

206-4261

17