Installer Menu (Cont.)
Installer Menu Items 000 through 047
Item | Function | Value Range | Default Value | Brief Description of Function | |
|
|
|
|
| |
000 | INSTALLER SEQ | 0 ~ 3 | 0 | Leave default set to 0. | |
|
|
|
|
| |
001 | POWER MANAGE | 0 ~ 7 | 0 | Sets number of hours of no activity before automatic shutoff. | |
|
|
|
|
| |
002 | AC ON | 0 / 1 | 0 | Set to 1 to enable TV to turn ON when AC power is applied. | |
|
|
|
|
| |
003 | BAND/AFC | 0 ~ 3 | 1 | Selects Tuning Band: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC | |
004 | STRT CHANNEL | 0 ~ 127, 255 | 255 | Channel tuned when TV is turned ON. (Set to 255 to tune to channel tuned | |
before TV turned OFF.) | |||||
|
|
|
| ||
005 | CHAN LOCK | 0 / 1 | 0 | If set to 1, cannot tune from current channel. | |
007 | STRT VOLUME | 0 ~ 63, 255 | 255 | Volume level when TV is turned ON. (Set to 255 to use volume level before | |
TV turned OFF.) | |||||
|
|
|
| ||
008 | MIN VOLUME | 0 ~ 63 | 0 | Sets minimum allowable volume setting. | |
|
|
|
|
| |
009 | MAX VOLUME | 0 ~ 63 | 63 | Sets maximum allowable volume setting. | |
010 | MUTE DISABLE | 0 / 1 | 0 | Set to 1 to disable Mute Function. | |
|
|
|
|
| |
011 | KEY DEFEAT | 0 / 1 | 1 | If set to 1, joystick button menu navigation functions on display panel are not | |
available. | |||||
|
|
|
| ||
012 | IR BANKS EN. | 0 / 1 | 0 | Set to 1 to enable TV to respond to bank discrete IR codes. | |
|
|
|
|
| |
013 | SCAN MODE | 0 / 1 | 1 | Set to 1 to allow Channel Up/Down to turn ON TV. (See detailed descriptions.) | |
014 | STRT CH IN SM | 0 / 1 | 0 | Set to 1 to use the Start Channel for the Channel Map pivot point in Scan Mode. | |
|
|
|
|
| |
015 | SLEEP TIMER | 0 / 1 | 1 | Set to 1 to enable Sleep Timer. | |
016 | EN TIMER | 0 / 1 | 1 | Set to 1 to enable On/Off Timers. | |
|
|
|
|
| |
017 | ALARM | 0 / 1 | 1 | Set to 1 to enable Alarm. | |
|
|
|
|
| |
020 | FEATURE LEVEL | 0 ~ 1, 16 ~ 24, | 1 | Determines an additional IR code scheme to which the TV will respond. | |
64 ~ 65 | |||||
|
|
|
| ||
021 | 0 / 1 | 1 | Set to 1 to enable | ||
|
|
|
|
| |
022 | MAX BLK HRS | 0 ~ 99 | 12 | Sets number of | |
|
|
|
|
| |
023 | CAPTION LOCK | 0 / 1 | 0 | Set to 1 to retain caption setting before TV turned Off. | |
|
|
|
|
| |
025 | FUNCTION PRE. | 0 ~ 1 | 1 | Set to 1 to allow Channel Preview/Banks Setup Menu access via CH | |
PREVIEW key on Installer Remote. | |||||
|
|
|
| ||
027 | HOSPITAL MODE | 0 ~ 162, 254 | 254 | Set according to the speaker selection, the pillow speaker code/supply voltage, | |
and the hospital IR code. See detailed instructions. | |||||
|
|
|
| ||
028 | CH. OVERIDE | 0 / 1 | 1 | If set to 0, user access to channel settings in the TV setup menus is restricted | |
and users can only tune to channels that are included in the channel lineup. | |||||
|
|
|
| ||
029 | OLD OCV | 0 / 1 | 0 | Set to 1 to remap the PTC’s direct tune channels for Aux inputs from 13x to 9x. | |
030 | ACK MASK | 0 / 1 | 0 | If set to 1, enables ACK feature of MPI. | |
|
|
|
|
| |
031 | POLL RATE | 20 ~ 169 | 94 | Selects poll rate for MPI. | |
032 | TIMING PULSE | 186 ~ 227 | 207 | Sets baud rate for MPI. | |
|
|
|
|
| |
035 | HDMI1 ENABLE | 0 ~ 2 | 1 | Set to 0 to disable HDMI 1. Set to 1 (DTV Mode) or 2 (PC Mode), as | |
applicable, to enable HDMI 1. | |||||
|
|
|
| ||
039 | REAR AUX EN | 0 / 1 | 1 | Set to 1 to enable display panel Video 1 input jack. | |
|
|
|
|
| |
041 | SIMPLINK EN | 0 ~ 3 | 0 | Determines the status of the SIMPLINK feature. (See detailed descriptions.) | |
042 | AUTO INPUTS | 0 ~ 255 | 0 | Determines the Aux inputs for which | |
descriptions.) | |||||
|
|
|
| ||
046 | STRT AUX SRCE | 1, 3 ~ 5, 255 | 255 | Sets the starting Aux source (if item 004 STRT CHANNEL is set to 0). | |
047 | AUX STATUS | 0 / 1 | 0 | Set to 1 for MPI Aux source to be reported as a channel number instead of | |
Channel 0. | |||||
|
|
|
|
23 |