![](/images/backgrounds/216376/216376-8436x1.png)
Channel Icons / Custom Text Labels
Changing Channel Icons and/or Adding or Editing Custom Text Labels in the
If there is no
(Icon)
Changing icons and/or adding or editing custom text labels can only be done if there are channels that have been transferred to the TV’s PTC either during the Express Script/Custom Master TV Setup (see pages 12 to 17 or pages 31 to 35, respectively) or by cloning (TLL file only). Note: A blank letter space is available between “Z” and “!”.
To perform channel editing/labeling:
1.Use the Installer Remote to access the TV Installer Menu (see “Accessing the Installer Menu” on page 21 for further information).
XYZ | XYZ | XYZ |
|
NETWORK
1 2 3 4 5 6 7 (Custom Text Label)
2.Press
3.Change channel icons and/or add or edit custom text labels as described in the procedures below. (You can do this more than once.)
4.To exit the menu when you are done, press MENU.
Changing a Channel’s Icon on the Master TV
1.Use Channel Up/Down to select the desired channel.
2.Use the Left/Right arrow keys to select the thin letter “I” on the
3.Use the Up/Down arrow keys to select the icon with which you want to identify the channel. (If you know the icon number, enter the number, and press OK.)
4.Proceed to add/edit custom text labels, or go to the next channel.
Adding/Editing Channel Labels on the Master TV
1.Use Channel Up/Down to select the desired channel.
2.Press the Left or Right arrow repeatedly until the numbers 1 to 7 appear on the display. The number shows the position of the character that can be changed. Number 1 is the first character, number 2 the second character, etc.
3.Use the Up/Down arrow keys to select the desired character.
4.Proceed to the next number posi- tion, or go to the next channel.
Adding/Editing Source Labels on the Master TV
1.Press CH. BANK to select the desired Aux input source: AV1, RGB, HDMI1, or HDMI2.
2.Press the Left or Right arrow repeatedly until the numbers 0 to 9 appear on the display. The number shows the position of the character that can be changed.
3.Use the Up/Down arrow keys to select the desired character.
4.Press CH. BANK for the next Aux input, or use Channel Up/Down to return to channels.
Installer Remote Control Key Functions for Master TV Channel Label Editing Menu
•Channel Up/Down: Tunes to the next channel in scan.
•Left/Right Arrows: Select the item to change. If “I” is shown, the icon can be changed. If a number is shown, it indicates the position of the character that can be changed.
•Up/Down Arrows: Select the icon or the character to be
displayed. Tip: Arrows can be held down for fast scrolling.
•0 – 9: Use to enter the index number of the icon, if known.
•OK: Changes the icon after the icon number has been entered.
•CH. BANK: Use to select Aux inputs.
•MENU: Exits the editing process.
36 |