Custom Master TV Setup (Cont.)

Custom Master TV Setup Procedure

1.Turn ON the TV.

If the EZ-Manager Wizard appears on the screen when you turn ON the TV, use the arrow keys on the Installer Remote to select Exit from the Welcome screen and press OK. In the confirmation pop-up window, select OK, and then press OK once more on the Installer Remote to exit the wizard.

2.Set Installer Menu items.

This step provides specific instruction only on the Installer Menu items that should be set on a Master TV. Refer to pages 21 to 30 for detailed information on all Installer Menu items.

a)Use the Installer Remote to access the PTC Installer Menu (see “Accessing the Installer Menu” on page 21 for further information).

The next step depends on whether the EZ-Manager Wizard appeared when you turned ON the TV:

•If the wizard did appear, the TV is in a factory default state, and you can proceed to set Installer Menu items. Go to step (c).

•If the wizard did not appear, go to step (b).

b)Set Installer Menu item 117 FACT DEFAULT to 1 and press OK on the Installer Remote. 

This clears all Installer Menu custom settings, channel lineup, etc. and restores the factory default settings. The value will change back to 0 after the PTC has been restored to factory default condition. This step ensures that the TV Channel Memory will be the active channel lineup. 

c)Set Installer Menu item 003 BAND/AFC, as appropriate.

•

Broadcast: Set to 0.

•

HRC: Set to 2.

•

CATV: Set to 1 (default).

•

IRC: Set to 3.

d)Set any other Installer Menu items that affect your TV programming network to the required configuration. For example, enable/disable Aux inputs, set a Start Channel, etc.

If you intend to use a USB memory device / .tlx file for cloning purposes, you may also configure selected settings in the IP Environment Menu (accessible from the Installer Menu). See also “Cloning Methods” on the previous page and “IP Environment Setup” on pages 56 to 63 for further information.

e)After you have adjusted all Installer Menu item settings as required, press OK once on the Installer Remote to save your changes; then, press OK again to exit the menu.

3.Set up TV features.

On-screen setup menus control the features of the TV. Press MENU SETTINGS on the Installer Remote to access the TV setup menus, and then set Channel, Picture, Audio, Time, etc. options to the desired configurations. See “Clonable TV Setup Menu Features” list on previous page and also notes on the following page.

xxLT777H PTC INSTALLER MENU

CPU-CTV

 

000

INSTALLER SEQ

000

 

 

 

 

 

 

 

UPN

000-000-000-000

ASIC D279

 

 

PTC

V1.01.026

CPU V3.45.00

 

 

 

Typical Installer Menu

 

 

 

 

 

117

FACT DEFAULT

000

 

 

 

 

 

003

BAND/AFC

001

 

 

 

 

 

 

Adjust the values for these

Installer Menu items, as required.

(Continued on next page)

32

206-4234