IP Environment Setup (Cont.)
Wired Network Connection
1.The next Network Connection window will enable you to specify the IP and DNS configuration for this TV. Auto (DHCP) tabs will be selected by default. If a DHCP server is configured and a static configuration is not required, you can simply select OK (on the screen) and then press OK on the Installer Remote. The DHCP server will assign an IP address and DNS server to the TV once the TV successfully connects to the network.
Otherwise, use the arrow keys to select the Static tab(s), and specify the static configuration data for both the IP and DNS modes. When all fields are completed, select OK (on the screen) and press OK on the Installer Remote.
Note: You can specify a static DNS server with an auto- configured IP address but not vice versa.
The TV will attempt to connect to the network and you will see a progress screen that indicates status as each network element is confirmed (see example at right). If the network is connected successfully, a “Wired network is connected” message will be displayed at the top of the screen and the network configuration data will be displayed in the lower half of the screen.
2.Select Complete (if not already selected), and then press OK on the Installer Remote to exit the Network Connection wizard and return to the IP Environment Menu.
Note: If the network connection is not successful, the progress screen will identify the network element in which the connection failed. Check your cabling and/or, if necessary, press
on the Installer Remote to return to the Configure IP and DNS Modes screen to verify the configuration data.
Wireless Network Connection
1.In the next Network Connection window, use the arrow keys on the Installer Remote to select the type of wireless connection to configure and press OK.
•AP List: Select from a list of available access points.
•Enter the SSID: Direct enter the SSID of an access point whose SSID has not been enabled for broadcast (i.e., the access point does not appear in the AP List).
•
•
•
Network Connection
Configure IP and DNS modes.
Auto (DHCP) or Static
IP Mode | Auto (DHCP) |
|
| Static |
| ||
| IP Address |
|
|
|
|
| |
|
| 0 | 0 | 0 | 0 | ||
| Subnet Mask |
|
|
|
|
| |
|
|
| 0 | 0 | 0 | 0 | |
|
|
|
|
|
| ||
| Gateway |
|
| 0 | 0 | 0 | 0 |
DNS Mode | Auto (DHCP) |
|
|
|
| ||
|
| Static |
| ||||
|
|
|
|
|
| ||
| DNS Server | 0 | 0 | 0 | 0 | ||
OK
Network Connection
Wired network is connected.
|
|
|
|
|
|
TV | Gateway | DNS | Internet | ||
MAC Address | : AA:BB:CC:DD:EE:23 | Gateway | : 10.10.10.10 | ||
IP Address | : 10.2.3.4 | DNS Server | : 10.5.6.7 | ||
Subnet Mask | : 255.255.255.0 |
|
|
|
|
Complete
Network Connection
Select the type of wireless network connection.
| AAA |
|
|
|
|
|
| AP List | |
| BBB |
|
|
|
|
| |||
| CCC |
|
|
|
|
| Enter the SSID | ||
| DDD |
|
|
|
|
| |||
| |||||||||
| EEE |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
Choose from APs to connect to the network. | |||||||||
(Continued on next page)
57 |