MAGIC REMOTE FUNCTIONS 33
MAGIC REMOTE FUNCTIONS
When the message Magic remote battery is low. Change the battery. is displayed, replace the battery. To install batteries, open the battery cover, replace batteries
(1.5 V AA) matching 
and 
ends to the label inside the compartment, and close the
battery cover. Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
CAUTION
••Do not mix old and new batteries, as this may damage the remote control.
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.
(POWER) Turns the TV on or off.
(BACK) Returns to the previous screen.
Wheel (OK) Press the center of the Wheel button to select a menu. You can change channels and scroll the menu by using the Wheel button.
(EXIT to LIVE) Switches among broadcast (antenna) and various inputs.
Color buttons These access special functions in some menus.
(
: Red, 
: Green, 
: Yellow, 
: Blue)
VOL 
Adjusts the volume level.
Displays the Screen Remote.
••Accesses the Universal Control Menu in some regions.
••Pressing and holding the 
button will display a menu to
select an external device that is connected to the TV.
Used for viewing 3D video.
(MUTE) Mutes all sounds.
••By pressing and holding the 
button, VD function will be enabled.
••SAP (Secondary Audio Program) Feature can also be enabled by pressing the 
key.
CH 
Scrolls through the saved channels.
|
| (Home) |
|
|
| Accesses the Home menu. | |
|
| (up/down/left/right) | |
|
| Press the up, down, left or right | |
|
| button to scroll the menu. If you | |
|
| press | buttons while the |
|
| pointer is in use, the pointer will | |
|
| disappear from the screen and | |
|
| Magic Remote will operate like a | |
|
| general remote control. To display | |
|
| the pointer on the screen again, | |
|
| shake Magic Remote to the left | |
|
| and right. |
|
|
| (Voice recognition) | |
| /INPUT | Network connection is required | |
VOL | CH | to use the voice recognition | |
|
| function. |
|
|
| 1. Press the voice recognition | |
|
| button. |
|
|
| 2. Speak when the voice display | |
|
| window appears on the left of | |
|
| the TV screen. | |
|
| ••Use the Magic Remote no | |
|
| further than 10 cm (4 inch) | |
|
| from your face. | |
|
| ••The voice recognition may fail | |
|
| when you speak too fast or too | |
|
| slowly. |
|
|
| ••The recognition rate may | |
|
| vary depending upon the | |
|
| user’s characteristics (voice, | |
|
| pronunciation, intonation, and | |
|
| speed) and the environment | |
|
| (noise and TV volume). | |
