Troubleshooting Checklist
No picture &
No sound
Picture OK &
No sound
The remote control
doesn’t work
Picture appears slowly
after switching on
No or poor color or poor picture
•Check whether the TV is turned on.
•Is the power cord inserted into wall power outlet?
; Is the power cord connected to the TV set properly?
•Test the wall power outlet, plug another product’s power cord into the outlet where the TV’s power cord was plugged in.
•Press the VOLUME (D / E) button.
•Sound muted? Press MUTE button.
•Check to see if there is any object between the TV and the remote control causing obstruction.
•Are batteries installed with correct polarity (+ to +, - to
•Correct remote operating mode set: TV, VCR etc.?
•Install new batteries. (Refer to p.12)
•This is normal, the image is muted during the TV startup process. Please contact your service center, if the picture has not appeared after five minutes.
•Select Color in the VIDEO menu and press the G button. (Refer to p.26)
•Keep a sufficient distance between the TV and the VCR.
•Activate any function to restore the brightness of the picture.
Horizontal/vertical bars | • Check for local interference such as an electrical appliance or power tool. | |
or picture shaking | ||
|
Owner’s Manual 49
