13
Connections to Your TV
Make one of the following connections, depending on the capabilities of
your existing equipment.
Tips:
•Depending on your TV and other equipment you wish to connect, there
are various ways you could connect the player. Use only one of the con-
nections described below.
•Please refer to the manuals of your TV, Stereo System or other devices
as necessary to make the best connections.
Cautions:
•Make sure the player is connected directly to the TV. Tune the TV to the
correct video input channel.
•Do not connect the player’s AUDIO OUTjack to the phono in jack
(record player) of your audio system.
•Do not connect your player via your VCR. The image could be distorted
by the copy protection system.

HDMI Connection

If you have a HDMI TV or monitor, you can connect it to this player using a
HDMI cable.
Connect the HDMI jack on the player to the HDMI jack on a HDMI
compatible TV or monitor (H).
Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
Note:
If a connected HDMI device does not accept the audio output of the unit,
the HDMI device’saudio sound may be distorted or may not output.
Tips:
•When you use HDMIconnection, you can change the resolution for the
HDMI output. (Refer to “Resolution Setting” on page 16-17.)
•Select the type of video output from the HDMI OUTjack using
[HDMI Color Setting] option on the [Setup] menu (see page 20).
Cautions:
•Changing the resolution when the connection has already been estab-
lished may result in malfunctions. To solve the problem, turn off the play-
er and then turn it on again.
•When the HDMI connection with HDCPis not verified, TV screen is
changed to black screen. In this case, check the HDMI connection, or
disconnect the HDMI cable.
•If there is noise or lines on the screen, please check the HDMI cable
(length is generally limited to 15 ft.).
Additional Information for HDMI
•When you connect a HDMI or DVI compatible device make sure of the
following:
-Try switching off the HDMI/DVI device and this player. Next, switch on
the HDMI/DVI device and leave it for around 30 seconds, then switch
on this player.
-The connected device’s video input is set correctly for this unit.
-The connected device is compatible with 720x480p, 1280x720p,
1920x1080i or 1920x1080p video input.
•Not all HDCP-compatible HDMI or DVI devices will work with this player.
-The picture will not be displayed properly with non-HDCPdevice.
-This player does not playback and TV screen is changed to black
screen.
1080p
DIGITAL
AUDIO OUT
H
1080p
DIGITAL
AUDIO OUT
BD player
TV
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 13