LG Electronics D3744S Cycle Selection, Custom Program, Manual Dry Temp, Cycles Load Type Minutes

Part 9 OPERATING YOUR DRYER

2Cycle Selection

•Turn the knob to select the desired cycle based on laundry types and conditions.

1. Sensor Dry Cycles

Sensor Dry Cycles allow you to match the cycle to the load you are drying. Each cycle dries certain fabrics at the recommended temperature. A sensor detects the moisture in the load and automatically adjusts the drying time for optimal drying

Cotton/Towels

Use for drying denims, towels, heavy cottons.

Normal

Use for drying sturdy fabrics such as work casual clothes.

Perm. Press

Use for permanent press and synthetic items.

Delicates

Use for drying synthetic fabrics, washable knit fabrics and no-iron finishes.

Sensor Dry Preset Cycle Settings

Sensor Dry	Temp.	Time*
Cycles Load Type		(Minutes)
COTTON/TOWELS	Medium	55
Towel, denim pants	High
NORMAL	Medium	41
Work clothes, corduroys
PERM. PRESS
Synthetics , permanent	Low	36
press
DELICATES	Low	32
Lingerie, sheets, blouses

2 8

2. Manual Dry Cycles

Use Manual Cycles to select a specific amount of drying time and a drying temperature. When a Manual Cycle is selected, the ESTIMATED TIME REMAINING display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing MORE TIME or LESS TIME.

Speed Dry

Use for small loads or loads that need a short drying time.

Freshen Up

Use this cycle to remove wrinkles from items, such as clothes packed in a suitcase or items wrinkled from being left in the dryer too long.

Air Dry

Use the Air Dry Modifier for items that require drying without heat such as rubber, plastic and heat- sensitive fabrics.

Manual Preset Cycle Settings

Manual Dry	Temp.	Default Time*
Cycles Load Type		(Minutes)
SPEED DRY	High	25
SMALL LOADS
FRESHEN UP	Medium	20
Remove Wrinkles	High
AIR DRY	Air Dry	30

3Custom Program

Set up your favorite combination of settings and save them here for one-touch recall.

1.Select a cycle.

2.Change DRY LEVEL and TEMP. CONTROL.

3.Select OPTIONS you want.

4.Press and hold the CUSTOM PROGRAM.

To recall your stored CUSTOM PROGRAM

Press CUSTOM PROGRAM button, then press

START/PAUSE.