Part 8 OPERATING YOUR DRYER
11. Custom Programming |
| 12. Beeper |
|
|
|
Set up your favorite combination of settings and save them here for
To store a CUSTOM
PROGRAM.
1.Select a cycle
2.Change DRY LEVEL and TEMP. CONTROL.
3.Select OPTIONS you want.
4.Press and hold the CUSTOM PROGRAM.
To recall your stored CUSTOM PROGRAM
Press CUSTOM PROGRAM button, then press
START/PAUSE.
Maintenance
The BEEPER controls the volume of the beep that is made when you press any of the buttons on the control panel and the termination of any cycle is indicated.
Press BEEPER to adjust the sound level or turn off the signal.
Clean lint filter
Clean the lint filter after each use and check it before use. Not cleaning or emptying the filter will increase drying time and energy consumption, therefore dryer life expectancy could be shortened after all.
■Clean the door and its opening
1. Wipe out the door opening. Otherwises,
2.Clean the transparent glass door to keep
inside view clear througth the glass.
1.Open the door and pull the filter straight up
2.Clean the filter using one of following ways in cases.
Run the fingers across the filter
Vaccum the lint filter
Wash the lint screen in warm,soapy water.
Dry thoroughly and replace.
2 8