19
Getting Started
3. When charging is finished, disconnect the travel
charger from the phone by pressing on the gray tabs
on both sides of the connector while pulling the
connector out.
nNotice
]If your phone is powered on while charging, you’ll see the
bars in the battery indicator icon cycle.
When the battery is fully charged, the bars in the battery
indicator icon will flash on and off.
If the battery fails to charge completely:
]After turning the phone on and off, please attempt to
recharge the battery.
]After detaching and reattaching the battery, please
attempt to recharge the battery.
Turning Your Phone On and Off1. Hold down the [END] key until the phone
switches on.
2. If the phone asks for a PIN, enter the PIN and press
the key or the key.
The phone searches for your network and after finding
it goes to the idle screen as illustrated below. From the
idle screen, you can make or receive a call.
nNote
The display language is preset to Automatic at the factory.
To change the language, use the Languages menu option
(Menu 9.2.5).
3. When you wish to switch the phone off, hold down the
[END] key until the power-off image displays.
1
1
2
Menu MallMenu Mall
CG225 ENG 0129 2007.1.29 10:17 AM ˘`19