Adjust the settings - more you can do
When you turn on for the first time
The menu for a language selection will appear when you turn on the unit for the
first time. You must select a language to use the unit. Use vV bB to select a
language then press ENTER and the confirm menu will appear. Use bB to
select [Enter]then press ENTER.
Adjust the language settings
Menu Language – Select a language for the Setup menu and on-screen
display.
Disc Audio/Subtitle/Menu – Select a language for the Disc Audio/Subtitle/
Menu.
[Original]: Refers to the original language in which the disc was recorded.
[Other]: To select another language, press number buttons then ENTERto
enter the corresponding 4-digit number according to the language code list.
(see page 15) If you make a mistake while entering number, press CLEARto
delete numbers then correct it.
[Off] (for Disc Subtitle): Turn off Subtitle.
Adjust the display settings
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
TV Output Select – Select an option according to the TV connection type.
[YPbPr]: When your TV is connected with the COMPONENT/PROGRESSIVE
SCAN OUTPUTjacks on the unit.
[S-Video]: When your TV is connected with the S-Video jack.
Adjust the audio settings
Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when
using the DIGITALAUDIO OUTPUT jack.
[Bitstream]: Select this when you connect this unit’s DIGITALAUDIO
OUTPUTjack to an amplifier with a built-in Dolby Digital, DTS or MPEG
decoder.
[PCM] (for Dolby Digital / MPEG): Select this when you connect this unit’s
DIGITALAUDIO OUTPUT jack to an amplifier without a built-in Dolby Digital
or MPEG decoder.
[Off] (for DTS): Select this when you connect this unit’s DIGITALAUDIO
OUTPUTjack to an amplifier without a built-in DTS decoder.
Sample Freq. (Frequency)– Selects the sampling frequency of the audio
signal.
[48 KHz]: The audio signals are always converted to 48 kHz.
[96 KHz]: The audio signals are output in their original format.
DRC (Dynamic Range Control) –Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal –Set to [On] only when a multi-channel karaoke DVD is playing. The
karaoke channels on the disc mix into normal stereo sound.
Adjust the settings1Display setup menu: SETUP
2Select a desired option on the first level: vv VV
3Move to second level: BB
4Select a desired option on the second level: vv VV
5Move to third level: BB
6Change the setting: vv VV/ ENTER
ON REMOTE
9