LG Electronics DU-50PY10 External A/V Source Setup, How to connect, How to use, DVD Setup

Installation

External A/V Source Setup

How to connect

Connect the audio and video cables from the external equip- ment's output jacks to the TV input jacks, as shown in the figure.

When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

HDMI /	DIGITAL AUDIO(OPTICAL)
DVI(VIDEO)	COMPONENT2	Cable
DVI
AUDIO INPUT	VIDEO INPUT

ANTENNA CABLE

AC INPUT

How to use

1.Select the input source with using the TV/VIDEO button on the remote control. (If connected to A/V INPUT , select Video input source).

2.Operate the corresponding external equipment. Refer to

external equipment operating guide.

R AUDIO L VIDEO

DVD Setup

HDMI /	DIGITAL AUDIO(OPTICAL)
DVI(VIDEO)	COMPONENT2
DVI

AUDIO INPUT VIDEO INPUT Cable

ANTENNA CABLE

AC INPUT

Camcorder

Video Game Set

or

DVD

or

DIGITAL AUDIO	(R) AUDIO (L)	B	R	S-VIDEO	(R) AUDIO (L)
OPTICAL

How to connect

1.Connect the DVD video outputs (Y, PB, PR) to the COMPONENT (Y, PB, PR) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.

2.If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.

NOTE: If your DVD player does not have component video output, use S-Video.

How to use

1.Turn on the DVD player, insert a DVD.

2.Use the TV/VIDEO or COMP/RGB/HDMI button on the remote control to select Component 1 or Component 2. (If connected to S-VIDEO, select the Video or Front Video external input source.)

3.Refer to the DVD player's manual for operating instructions.

•Component Input ports

To get better picture quality, connect a DVD player to the compo- nent input ports as shown below.

Component ports	Y	PB	PR
on the TV
Video output ports	Y	Pb	Pr
	Y	B-Y	R-Y
on DVD player	Y	Cb	Cr
	Y	PB	PR

Notes:

•Digital Audio will not work for Component 1 input source.

•Digital Audio operation has priority if Digital Audio and AUDIO L/R are connected at the same time.

Owner’s Manual 15